Form #43219000 Sept 2012 INSTALLATION AND OPERATION INSTRUCTIONS OWNER / INSTALLER: For your safety this manual must be carefully a
Form #43219000 Sept 2012 1. Connect to the supply tank or manifold in accordance with the latest edition of National Fuel Gas Code (ANSI Z223.1), and
Form #43219000 Sept 2012 10) INSTRUCTIONS FOR PRESSURE TEST GAUGE CONNECTION Supply Pressure 1. The installer will provide a 1/8" N.P.T. plugg
Form #43219000 Sept 2012 11) ELECTRICAL CONNECTIONS 1. All electric wiring shall conform to the latest edition of the National Electrical Code (AN
Form #43219000 Sept 2012 FIELD CONNECTION AND THERMOSTAT WIRING DIAGRAMS A. LINE VOLTAGE (120V) THERMOSTAT CONNECTIONS – SINGLE HEATER PER THERMOSTAT
Form #43219000 Sept 2012 E. TYPICAL THERMOSTAT WIRING INSTALLATIONS FOR STANDING PILOT (N1 OR L1 CONTROL) IGNITION SYSTEM 12) VENTILATION Wher
Form #43219000 Sept 2012 13) LIGHTING AND SHUTDOWN INSTRUCTIONS STANDING PILOT IGNITION SYSTEM (Ignition Suffix “1”) 1) Turn the dial to “PILOT
Form #43219000 Sept 2012 14) SEQUENCE OF OPERATION The chart below shows the sequence of operation for the normal operating cycle of the heater equi
Form #43219000 Sept 2012 a) Lower the heater to the floor or other suitable working surface. b) Remove the reflector from the reflector mounting pan
Form #43219030 Apr-03 18) REPLACEMENT PARTS GUIDE MODELS: RSCA3-(N1, L1) Item No. Part No. Description 1 42129000 Plenum Box Assembly 2 421
Form #43219000 Sept 2012 IMPORTANT: Please order by Part Number, not by Item Number. Refer to complete Model Number when ordering. All repla
Form #43219000 Sept 2012 TABLE OF CONTENTS SECTION DESCRIPTION PAGE SECTION DESCRIPTION PAGE 1) Safety ...
Form #43219000 Sept 2012 MODELS: RSCA3-(N5, L5) Item No. Part No. Description 1 42129000 Plenum Box Assembly 2 42192000 Emitter Kit (includes items
Form #43219000 Sept 2012 20
Form #43219000 Sept 2012 MODELS: RSCA6-(N1A, L1) Item No. Part No. Description 1 40714000 Plenum Box Assembly 2 41218000 Emitter Kit (includes items
Form #43219000 Sept 2012 22
Form #43219000 Sept 2012 MODELS: RSCA6-(N5A, L5) Item No. Part No. Description 1 40714000 Plenum Box Assembly 2 41218000 Emitter Kit (includes items
Form #43219000 Sept 2012 24
Form #43219000 Sept 2012 MODELS: RSCA10-(N5A, L5) Item No. Part No. Description 1 40742000 Plenum Box Assembly 2 41219000 Emitter Kit (includes items
Form #43219000 Sept 2012 26
Form #43219000 Sept 2012 19) WARNINGS CARD This card is furnished with each heater. Additional copies may be ordered under part no. 43344990. 2
Form #43219000 Sept 2012 LIMITED WARRANTY: Gas-Fired Products, Inc., the manufacturer, warrants to the original owner of any Space-Ray
Form #43219000 Sept 2012 1) SAFETY This heater is a self-contained infrared radiant ceramic heater. Safety information required during installation a
Form #43219000 Sept 2012 SAFETY REQUIREMENTS The heater area must be kept clear and free from combustible materials, gasoline and other flammable
Form #43219000 Sept 2012 This heater is for Indoor Installation only and can be used in Unvented mode. The term Unvented actually means Ind
Form #43219000 Sept 2012 A critical safety factor to consider before installation is the clearances to combustible materials. Clearance to combustible
Form #43219000 Sept 2012 NOTE: The clearance to combustible materials noted above must be maintained at all times and the same clearan
Form #43219000 Sept 2012 6) RSCA DIMENSIONS 7) HANGING The heater can be mounted with the reflector horizontal or angled up to 45º from ho
Form #43219000 Sept 2012 8) OPTIONAL PARABOLIC REFLECTOR EXTENSION ASSEMBLY The heater is completely factory assembled and requires no field assembl
Kommentare zu diesen Handbüchern